Skip to content ATS at the 5th CBCFD: Exhibition and Congress
ATS, Brazilian distributor of CFD++, MIME, Tecplot 360 EX, Ennova and Nexus, sponsored the 5th CBCFD with a booth and a round table on GPU and AI in CFD.
Aircraft Icing Explained: Interview with Revista Asas
One week after the Voepass Flight 2283 accident, Guilherme Lima da Silva explained to Revista Asas how ice forms in flight, what severe icing (SLD) is and how engineering deals with it.
FAPESP PIPE: iceAccretionFoam, from 2D beta to 3D MVP
ATS4i had its iceAccretionFoam project approved under FAPESP PIPE. Phase 1: a 2D rime and glaze beta in 8 months. Phase 2: a 3D MVP with thermal ice protection, brought to market through consultancy and SaaS.
ATS4i Presents iceAccretionFoam at the SAE AC‑9C Committee in Italy
At the SAE AC-9C committee, hosted by CIRA in Italy, ATS4i presented the plan for iceAccretionFoam, a 3D CFD aircraft icing code later approved under FAPESP PIPE.
Aço Verde do Brasil Award 2026: Low NOx Burner with CFD Cuts NOx by Up to 37%
The ATS4i and Samarco Low NOx burner won the Aço Verde do Brasil Award at ABM Week 2026: CFD++ design and NOx reductions of 15% to 37% in field tests.
Challenges and Solutions in Hypersonic Speed Technology
The Science of Hypersonic Travel Did you know that hypersonic speed is defined as five times the speed of sound, or over 3,800 mph (6,125 km/h)? To put this in perspective, most commercial airplanes fly at approximately 560 mph (900 km/h). Imagine something traveling at a speed more than six times that! Space missions and […]
Boosting Performance: CFD in the Automotive Universe
CFD no Automobilismo No século XIX, as equações de Navier-Stokes abriram as portas para a descrição matemática dos complexos padrões de escoamento de fluidos. Contudo, somente com o advento da tecnologia de computadores na segunda metade do século XX, foi possível desvendar esse vasto sistema de equações. A fluidodinâmica computacional (CFD) emergiu como um ramo […]
MSX: The Legacy of a Technological Revolution
In June 1983, Japan’s ASCII Corporation, led by Kazuhiko Nishi, announced with Microsoft a home computer standard that promised something rare at the time: the same program running on machines from different manufacturers. It was MSX. Forty years later, it is remembered as one of the platforms that trained a generation of programmers, including in […]
ATS at NUMAP-FOAM Summer School 2023
NUMAP-FOAM Summer School 2023 and Our Collaboration with Prof. Hrvoje Jasak In the realm of engineering and computational simulation, the pursuit of excellence is an unwavering commitment. Last month, Jayme, an engineer at ATS Aerothermal Solutions, had the honor of attending the prestigious NUMAP-FOAM Summer School 2023 in Cambridge, where a confluence of […]
Simulation for Airfoil Ice Protection Systems
Numerical Simulation of Coupled Heat and Mass Transfer for Airfoil Ice Protection Systems The prevention of ice accretion on aircraft wings is an imperative concern for the aviation industry, with critical implications for both safety and efficiency. In another landmark contribution from ATS, the chapter titled “Numerical Simulation of Coupled Heat and Mass Transfer […]